lv | ru | en | ee | lt
Log in
Register
Wish0
list
Basket 0
0.00 €

Machine Control Receivers

Products » Machine control systems for excavators and bulldozers / graders » Machine Control Receivers

Machine control receiver set FMR-706 M/C SET & repeater RP-707

code: GF0709
manufacturer: geo-FENNEL
in stock, 2 cnt.
€126500without VAT 1045.45 €
inbankdivide into 3 parts = 421.67 €
    Price includes VAT 21%.
    The indicated price is valid ordering till 09.05.2026.
    The stock is informative
    FMR 706 M/C SET
    The laser receiver FMR-706 M/C complete with a signal repeater FRP-707 is designed for use in construction equipment.

    The receiver is used to control the height of the excavator bucket or the blade of the bulldozer and grader along the base laser plane set by any laser level. The FMR-706M/C receiver is fixed to the machine surface with the help of magnets or special clamps.

    The signal repeater FRP-707 will to install in the operator’s cab. The FRP-707 repeater is designed for use with the FRM 706 laser receiver. The display is mounted using a bracket in the grader, bulldozer or excavator cab and allows the operator to monitor the blade or bucket position. Signal arrows indicate to the operator the deviation of the position of the working body from the planned plane.

    The sensor of the detector with a height of 25 centimeters and the ability to catch the beam around 360 ° allows it to be used for a wide range of tasks.

    Main applications:

    - control of the depth of the selected soil excavator in quarries or on the construction site
    - control of the filling and hauling of the soil when planning with the dump of the pads and pads under the road bed - will help to avoid overly selected or overfilled soil
    - control of the height of the ground leveling on large areas

    Benefits:

    •     High detector height (25 cm)
    •     360 ° beam reception
    •     Powered by internal battery
    •     The ability to connect a repeater display FRP-707 installed in the cab
    •     Works with any models of red rotary laser levels.
    •     Dust and moisture protection according to IP66
    Specifications:
    Range of operation: up to 200 m (depending on the class of the laser level)
    Accuracy (accurate mode): ± 2 mm - ± 10 mm
    Accuracy (normal mode): ± 5 mm - ± 23 mm
    Sensor height: 25 cm
    Power: built-in Ni-MH battery (7.2 V, 2500 mAh)
    Working time: 40 hours
    Charging time: 15 hours
    Operating temperature: -20 ° C to + 50 ° C
    Protection against water and dust: IP66
    Dimensions: 376 x 180 x 49 mm
    Weight: 3.1 kg
     
    Contents of delivery:
    • FMR-706C receiver with 12 / 24V power cable with crocodiles
    • Charger
    • Repeater FRP-707 with signsl/power cable
    • Transport case
    • DE, ENG, LV instructions